H3c Nat Inbound. Support H3C Virtual AP Technology White Paper6W100 H3C As a best practice, manually create a route because it takes time to automatically add routes nat inbound rule move nat-rule-name1 {after | before } nat.
H3Caclnat_华三静态nat配置命令CSDN博客 from blog.csdn.net
Configure NAT on the device to implement the following: • For outbound packets sent by the internal users, translate the private IP addresses of internal users to the public IP addresses in the range of 61.16..2 to 61.16..3 • Allow the internal and external users to use the IP address 61.16..1 to access the FTP servers.
H3Caclnat_华三静态nat配置命令CSDN博客
nat inbound是先转换再查路由转发，nat outbound是先查路由表再转发。 因外网路由复杂，不方便写回程路由，所以nat inbound一般是用于外网访问内网服务器使用，搭配nat server一起用的，不单独使用。 An ipsec tunnel is established between the headquarters and the branch. Network Address Translation (NAT) translates an IP address in the IP packet header to another IP address
Support 12Inbound link load balancing H3C. qos apply policy 1 inbound nat hairpin enable nat service slot 4 # interface GigabitEthernet3/1/2 port link-mode route ip address 61.16..1 255.255.255. Home Support Configure & Deploy Configuration Guides H3C SecPath F1000[F5000] Firewalls Series Configuration Guides(V7)-6W901 05-NAT Configuration Guide Table of Contents
. nat inbound是先转换再查路由转发，nat outbound是先查路由表再转发。 因外网路由复杂，不方便写回程路由，所以nat inbound一般是用于外网访问内网服务器使用，搭配nat server一起用的，不单独使用。 Configure NAT on the device to implement the following: • For outbound packets sent by the internal users, translate the private IP addresses of internal users to the public IP addresses in the range of 61.16..2 to 61.16..3